Shake well and often before and during use. Make sure all solids have been released from the bottom of the container. Apply small amounts to a soft cloth and rub into surface with light to medium pressure.
On metals such as aluminium, brass or cooper rub until product turns black.On chrome or stainless steel rub until stains are gone. Let product dry to a greyish haze. With a dry cloth, remove surface residue completely. Repeat as needed to obtain maximum shine.
For best application we find the use of an old rag or terry cloth works best. Can also be used with both #00 and #0000 wire wool.Less is more and only a small amount of product is required. You will notice that it blackens quickly, whilst it is not necessary we recommend you let the product dry before removing with a clean towel or microfiber cloth.
Follow up with Final Shine (metal polish & Sealant) to produce a ‘chrome’ like finish on stainless steel that lasts!Besides metals Easy Cut can also be used on plastic headlight lenses to clear oxidation and glass to remove hard water spots / deposits.