For best results thoroughly clean surface first with Grime Out. Apply Solution Finish to your clean, dry, cool surface in the shade. Wear gloves and eye protection. Shake bottle well and apply a small amount to applicator pad or microfiber sponge. Spread a thin coat over area in an even motion, covering area completely. Allow solution to penetrate for 1-2 minutes.
Use a clean microfiber sponge or foam pad to buff off excess and wipe off glass and paint (will stain unsealed paint). Admire the results!
Useful tips and special cautions: Use with adequate ventilation - Solution Finish will stain clothing and skin. Do not use on painted or glass surfaces; wipe off immediately with a clean applicator pad, terry cloth or microfiber towel if solution gets on these areas. For best results after using Solution Finish, do not wash treated area for at least 4 hours.Use Solution Finish only as intended. Store Solution Finish in a dry, cool place away from heat or flame. Keep bottles tightly closed when not in use. Applicator pads can be reused if stored in a sealed plastic bag.